What is the model and selection key of centrifugal air compressor

Release time：2025-12-25    Click：10

What is the model and selection key of centrifugal air compressor? As the core power equipment in the industrial field, the model selection of centrifugal air compressor is directly related to production efficiency and operating cost. Faced with a variety of different models in the market, many buyers often find it difficult to choose because of the variety of models and the great difference in parameter labeling. This paper will systematically analyze the model system of centrifugal air compressor to help you choose the equipment suitable for working conditions.

Turbo-Tech introduces the model and selection key of centrifugal air compressor as follows:

I. Model Rules and Parameter Meaning

The model of centrifugal air compressor usually contains the information of "power/displacement+type+configuration". Different brands have their own naming logic, but the core parameters are basically the same:

Flow range: the volume of gas treated per unit time, usually expressed as Nm3/h or m3/min;

Pressure range: exhaust pressure, usually expressed in MPa or bar;

Power: power of driving motor, in kW;

Medium: compressible gas type, such as air, nitrogen, carbon dioxide, etc.

II. Overview of Turbo-Tech series

Series flow range (Nm3/h) and pressure range (MPa) applicable scenarios

Ti series 1200 ~ 240000.06 ~ 1.6 small flow demand, biological fermentation, steel industry;

Mn(H) series 1200 ~ 600000.12 ~ 16.0 high-voltage fields such as air separation, petrochemical and air energy storage;

Ra series 1200 ~ 600000.25 ~ 40.0 Petrochemical, coal chemical and natural gas treatment;

Third, the key elements of selection and Tips

Clarify the core requirements: accurately evaluate the average and peak gas consumption of the production line and the required working pressure;

Pay attention to the level of energy efficiency: choose equipment with high energy efficiency, the efficiency of Ti series of Turbo-Tech is 3-6% higher than that of traditional models, and long-term operation can significantly reduce the electricity bill;

Matching of medium characteristics: Select the corresponding model according to the compressed medium, such as Ti series or Mn(H) series for common gases as air and nitrogen, and Ra series for Turbo-Tech for special process gases;

Pressure and flow matching: pay attention to the corresponding relationship between pressure and flow, the flow of the same model under different pressures may be very different;

After-sales service considerations: choose brands with perfect service network to ensure timely response when equipment fails.

Practical Tips: In the process of type selection, it is recommended to communicate with suppliers and provide detailed working condition information (ambient temperature, humidity, intake pressure, etc.) in order to obtain a suitable type selection scheme. At the same time, we should not only look at the initial procurement cost, but also comprehensively consider the whole cycle cost of equipment, including energy consumption, maintenance and possible shutdown losses.

The above is an introduction to "the key to the model selection of centrifugal air compressor". The model selection of centrifugal air compressor is a systematic project, which needs to comprehensively consider many factors such as flow rate, pressure, medium, energy efficiency and working conditions. It is suggested that when selecting models, we should first make clear our core requirements, then match the corresponding types of models, and then confirm the specific parameters through technical communication with manufacturers.